Lid Closers & Openers

Wizard® WIZ-Kid® Model G HEAVY DUTY DRUM DEHEADER General Purpose Deheader Opens Drums for use as Utility Containers or Sold for Scrap. The Wizard® Model G cuts on the inside of the drum chime, leaving a smooth, burr-free edge for safe drum handling. Perfect for deheading a high-to-moderate volume of fill and empty 30 to 55 gallon industrial drums of up to 16 gauge steel, with either flat or round chimes. The 1-½" dia. cuter wheel travels between the chime and bung fitting as it cuts. Automatic Air Operated Deheader is effective when a large number of drums are being deheaded. Non-Ferrous ...

Wesco® HORIZONTAL DRUM VENT - FM APPROVED The Wesco® Drum Vent is used for drums in the horizontal, pouring position. Automatically relieves pressure at 5 psi and maximum flow of 220 CFM at 20 PSI. Manual vacuum relief can be done by lifting and rotating the valve stem. Flame arrestor prevents sparks and flame from igniting the drum contents. Fits 2" bung hole in steel and plastic drums. Non-sparking brass construction and FM approved.

Wesco® NON-SPARKING ALUMINUM ROTARY DRUM PUMP Wesco® Drum Pumps are built for years of use in industrial applications. Each pump includes a 2" bung adapter for use with 15, 30 and 55 gallon drums. Non-Sparking Rotary Pump is constructed of non-corrosive aluminum and phenolic pump veins allowing use with medium viscosity, petroleum-based products. Self-priming pump is supplied with a 47" three-piece steel plated suction tube and a 48" PVC discharge tube.

Wesco® CAST-IRON ROTARY DRUM PUMP Wesco® Drum Pumps are built for years of use in industrial applications. Each pump includes a 2" bung adapter for use with 15, 30 and 55 gallon drums. Rotary Pump features a durable cast-iron housing and phenolic pump veins suitable for transferring fuel oil products. Self-priming pump is supplied with a 47" three-piece steel plated suction tube and a 48" PVC discharge tube.

Stainless Steel Rotary Drum Pump features PTFE vanes. Pump body, dispensing spout and 3-piece suction tube are all constructed of 304 stainless steel. Pump dispenses 9 ounces per handle revolution. Used for solvents, oils and mild corrosives. Temperature rating 40 to 140° F. Fits 15, 30 & 55 gallon drums with a 2" bung opening. 3 piece suction tube, 2" bung adapter and curved discharge spout are included. Note: Always use a ground wire.