Global Pipe Fitting 90 Degree Elbow 1-1/2" Diameter 90 Degree Elbow Pipe Fitting is used to make a 90 degree connection between straight lengths of pipe. Elbow pipe fitting is typically found as an end joint when building pipe hand railing, guard rail or other pipe-based structures. Elbow joint is durably constructed from galvanized iron for corrosion resistance and long lasting strength. Fitting locks onto 1-1/2" diameter pipe with hardened set screws (included) for secure connection. Anchor hole is slightly larger than ½" diameter.

The Rapidair 1/2 in. tubing x 1/2 in. tubing Elbow fitting, features a push to connect style to make fast and easy connections. There is no glue, soldering or crimping needed. Simply cut the tubing to length and insert the tubing into the fitting. Tubing can be released by push button if desired.

Global Pipe Fitting - Rail Flange 1-1/2" Diameter Rail Flange Pipe Fitting is commonly used to mount hand rail, guard rail or other pipe-based structures to the floor. Durably constructed of galvanized iron to provide maximum corrosion resistance and long lasting durability. Rail flange includes two hardened set screws in the vertical socket for greater side load stability. For safe installation, flange fixing holes should be in line with the applied load. For 1-1/2" diameter pipe. Anchor hole is slightly larger than ½" diameter.

This clamp is designed for use on top of the #04, #05, #14, #15 (1-1/4" or 1-1/2" Snap Clamp) in order to strengthen the grip of the ABS clamps. In addition, the #24 Grip Clamp LOOSELY fits "trade size" 1-1/2 inch EMT. If using #24 by itself on EMT use thicker material or double up on material to ensure a snug fit. Inside Diameter of #24 Grip Clamp is 1.76 inches / 45mm.

Global Pipe Fitting - Side Outlet Tee 1-1/2" Diameter Side Outlet Tee Pipe Fitting is frequently used to join an upright with three horizontal pipes when building racking, structural framework or hand rail systems. Upright passes through the side outlet tee for precise placement of each horizontal rail. Pipe fittings are made from galvanized iron for long lasting durability and corrosion resistance. Fitting locks onto 1-1/2" diameter pipe with hardened set screws (included) for secure connection. Anchor hole is slightly larger than ½" diameter.