Eyewash Stations & Showers Accessories & Parts

This freeze protected and insulated shower is intended for use where there is a possibility of the water inside of the shower freezing due to extreme cold climates. This floor mounted emergency combination shower features a specially designed, high-performance quarter-turn ball valve made of 316L stainless steel to endure the harshest environments and site conditions. Low operating torque to open valve offers reliable, easy on/off operation when emergencies occur. Valve includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated ...

For cold climates with a minimum ambient operating temperature of -4°F (-20°C) or above—trace tape heating with polyethylene jacket and polyurethane foam insulation improve frost protection and strength. Suitable for both Class 1 Division 2 hazardous areas, as well as non-hazardous areas. Includes a universal safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history. Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements. This freeze protected and insulated drench shower is intended for use where ...

Combination shower eye/face wash unit is a free standing floor mounted unit. Shower valve opens quickly by a pull rod with a triangular handle. Shower provides a superior wash down with a more even spray pattern. Eyewash operated by a large, highly visible push handle. Safe, steady water flow under varying water supply conditions from 30-90 PSI insured by integral flow control in the spray head assembly. Features 120 volt electric heat trace cable with pipe insulation regulated to -50° F (-45.5° C). Rated for use in Class 1 Division 2, groups B, C, and D locations. NEMA 4X ...

Combination shower eye/face wash unit is a free standing floor mounted unit. Shower valve opens quickly by a pull rod with a triangular handle. Shower provides a superior wash down with a more even spray pattern. Eyewash operated by a large, highly visible push handle. Safe, steady water flow under varying water supply conditions from 30-90 PSI insured by integral flow control in the spray head assembly. Features 120 volt electric heat trace cable with pipe insulation regulated to -50° F (-45.5° C). Rated for use in Class 1 Division 2, groups B, C, and D locations. NEMA 4X ...

Haws® Emergency Valve For Eyewash Station, 12 GPM Model 9201EFE (patent pending) is a thermostatic mixing valve that mixes hot and cold water to supply tempered water of up to 12 gpm (45.4 L) for emergency eyewash fixtures. Unit employs a paraffin filled thermostatic mixing element. Lowest internal pressure drop where supply pressure is low, and a high Cold Water Bypass flow rate of 10 gpm (37.8 L). The improved brass design with a one piece casting uses internal check stops, over-sized valve seats, a shuttle design that eliminates valve binding, and a funnel design to improve temperature ...