Notchers

The CS-275EU makes pristine cuts as only a cold saw can. It's ideal for light metal fabrication and chassis. A cast iron base and flood coolant system ensure a long lifetime of use. Accepts an 11" blade (included). 3.25" round tube capacity at 90°, big enough for just about any chassis project. Miters up to 45° left and right. Dual-mitering head lets you tackle various shapes and materials like pipe, angle iron, and solid bar. Blade turns at 54 rpm. Robust 1.5 hp motor runs on 110-volt power, so you can use it anywhere. Fully cast iron head will deliver clean cuts for many ...

At a blistering 30 strokes a minute, this hydraulic shear will save you time and money. Made of fully integrated and welded steel plate, the SH-6014 can run at full capacity all day long. 60" length. 14 gauge mild steel maximum capacity. Minimum capacity of 24 gauge mild steel. 3 hp motor runs on 220-volt 3-phase power. Adjustable 24" backgauge ensures precise repeatability. Front support arms and table guides keep the material square to the blade. 3 modes on the operator console: Inch mode: Jog the control and ease the blade down to the material. Single mode: Make one cut cycle per foot ...

With its welded steel frame, this hydraulic sheet metal shear offers a long lifespan of use cutting thick materials for high production. The adjustable blade gap and rake angle ensure quality cuts. 52" length. 10 gauge mild steel maximum capacity. Minimum capacity of 24 gauge mild steel. 7.5 hp motor runs on 220-volt 3-phase power. Industrial-grade hydraulic system is located in the front for easy fluid changes. 35 to 47 strokes per minute for speedy production. Shearing carriage rides on hardened ways and uses heavy-duty bearings to reduce friction. Manually adjustable 23.62" backgauge ...

This semi-automatic, 3 phase cold saw will save time while making large amounts of pristine cuts. Built to last, this Baileigh chop saw offers a cast iron head and base, a pneumatic vise, and a flood coolant system. Accepts an 11" blade. Maximum capacity of 2.75" round tube at 90°. Cuts thin-, medium-, or thick-walled pipe, as well as tubing, extrusions, and solid bar stock. Miters 45° right and 90° left, perfect for slotting applications. You can switch between 2 operating speeds, 60 and 120 rpm, depending on your application. 3 hp motor requires 220-volt 3-phase power to ...

Built for years of heavy cutting, this numerically controlled shear makes industrial production runs more efficient. Blade gap and rake angle adjustment ensure high cut quality. These hydraulic sheet metal shears cut up to 52"-wide sheet metal. Maximum capacity of -1/4" mild steel. 15 hp motor runs on 220-volt 3-phase power. Upper blade carriage that rides in a 3-axis bearing housing. Heavy-duty precision ground and hardened rail system gives you unbeatable accuracy and long blade life. Front and rear supports and side guides help you keep material square to the blade. Roller infeed table ...