Hinges

Features Two ball bearings Non-rising removable pin with button tip and plug 5 x 5 (127 mm x 127 mm) and 4-1/2 x 4-1/2 (114 mm x 114 mm) BB1279 available with two different leaf sizes 3-1/2 x 3-1/2 (89 x 89 mm) BB1279 available with reversible hole pattern For use on medium weight doors or doors requiring medium frequency service

Features Mop Plate: Protects the bottom of the pull side of doors subject to cleaning and mopping procedures. Kick Plate: Protects the bottom of the push side of doors subject to scuffing from foot traffic. Stretcher Plate: Protects doors in specific areas where constant contact is made by stretchers, service carts, or other equipment. Armor Plate: Protects lower half of doors from abuse by carts, trucks, and rough usage. Gauge: 0.050 (1.3 mm) Materials: Aluminum, brass, bronze, stainless steel Finishes: US3, US4, US10, US10B, US28, US32, US32D Bevel: None Options: UL Listed for US32 and ...

Features Certification: Meets ANSI A156.6 for J304 Push Plate Gauge: 0.125 (3.2 mm) Materials: Aluminum, brass, bronze, stainless steel Finishes: US3, US4, US10, US10B, US26, US26D, US28, US32, US32D Fasteners: Six (6) #6 x 5/8 OPH tapping screws Options: May be ordered cut for cylinder (CFC) or engraved PUSH Notes: For sizes or finishes not listed in this catalog

Features Certifications: Meets ANSI A156.16 for L01371 Base Diameter: 2-1/4 (57 mm) Height: 3-19/32 (91 mm) Keeper:25/32 x 1-1/2 (20 mm x 38 mm) Materials: Cast brass with black rubber bumper Finishes: US3, US10, US10B, US15, US15A, US19, US26, US26D Fasteners: Three (3) 10 x 1 OPHWS, one (1) plastic anchor, one (1) 5/16-18 lead anchor,and one (1) 5/16-18 x 2-1/2 threaded stud Notes: 2-1/2 (64 mm) max door to floor clearance Heavy duty - for use in high traffic areas For use on concrete floors Manual holder ideal for interior and exterior applications Unit functions as a stop, but can ...

Features: Square Corner - Beveled Push Plate Certification: Meets ANSI A156.6 for J301 Push Plate Gauge: 30S - 0.050" (1.3 mm), A30S - 0.062" (1.6 mm) Materials: Aluminum, brass, bronze, stainless steel Finishes: US3, US4, US10, US10B, US26, US26D, US28, US32, US32D Options: May be ordered cut for cylinder (CFC) or engraved "PUSH"